 |
 Plate-type
Elevators
This model complements our line
of standard elevators. Its strong points are its flexibility,
its low noise level and its gentleness on the finish of the
parts.
The plates used in these
elevators can be constructed from various materials depending
on the parts which are being conveyed.
Parts sorting can be accomplished
using a linear vibratory or a belt conveyor feed track. Misoriented
parts which do not make it through sensitive equipment can be
carried back to the sorter or put back in the hopper.
When the load volume is
too high, the elevator is stopped by a control cell.
 Elévators
Feeding Elevators |
Feeding Elevators |
Magnetic Elevators |
• Transport by metallic
chain for metal parts.
• Transport by plastic chain
(optional synthetic coating for caplets, capsules and light
materials).
• Transport by belt (special
grade by request) for filling vials/bottles, food packaging,
etc. Features
common to all elevator types:
:
•
Loading height: from 1,000 to 4,000 mm
•
Belt/chain width: from 100 to 500 mm
•
Hopper capacity: from 50 to 300 litres.
The hopper can be constructed
to specifications and can be replaced by a vibratory or mechanically
driven hopper.
Parts sorting can be handled
by a linear orientor or a conveyor belt.
In the case of sensitive equipment, parts which do not make
it through, can be carried back to the sorter or put back
in the hopper.
When the load volume is
too high, the elevator belt is stopped by a control cell.
Equipment: painted
steel:
•
Motors :
- Direct drive
motors
- Gear motors (chain)
- Speed regulator
(optional mechanical speed restricter).
•
Steel conveyor chain :
- "Light"
construction
- Application:
front output vertical stock bin or left or right output sorting
system for the conveyance of "medium-weight" metal
parts.
- Blind width:
190 mm. max.
•
"Heavy" construction
- Application:
front output vertical stock bin or left or right output sorting
system for the conveyance of heavy metal parts.
- Blind width:
250 mm. max. .
 TRE
150-250 Hopper Elevator
|
